What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
12.06.2025 04:59

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Edit 2024–10.
This one hit behind the barn.
Police take back statement dismissing hate crime in gay actor’s killing - The Washington Post
Here is a simplified AC power diagram.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
a photo is worth a thousand words.
Barnstars:
Why do only ugly women like me on Tinder? Is it because I'm an ugly man?
He then describes Rainy Season and Lightning.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Scientists develop 'mosquito STD' to combat malaria - Phys.org
He then describes the function of a fuse.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
[image of Common-mode choke]
15 Retinol-Rich Foods To Stimulate Collagen - Vogue
[old diagram got deleted by accident]
eight
At least they know the answer if they wanted it.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
There are three different concepts here that are getting confused.
Why do men prefer low-maintanence women?
2024–10–16 [ OO OLAOYE OYEBODE ]
What does a fuse do?
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Upcoming Telescope Predicted to Discover Millions of Hidden Solar System Objects - Gizmodo
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Is it ok to be spanked by your parents if you are not in bed in your set bedtime?
what exactly is a ‘surge’ protector?
This device then solves the entire problem.
But it can get overloaded, and no longer works.
What are some hard truths that MAGA needs to hear?
The third is lightning and “how it gets conducted into a home.”
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
2024–10–14 [Omar Gharbi Omar Gharbi ]
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
nine
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
the problem then depends on "how fast does the fuse operate?".
He then asserts :
For this case there are devices called Metal oxide varistors (MOV).
This is 'the assistant's answer'
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
An AC voltage/ current source, and an ac inductive load.
2024–10–10[John johnson John Johnson ]
(Dc diagram shown, AC is similar).
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
This is where this question deviates from being a 'generic' question, and becomes more specific.
but this device (an Inductor) … impedes the rapid changes in the current.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
First Sentence:
A circuit breaker is similar, but is resettable.
What is lightning?
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
These devices are installed between the “hot” and “neutral” and protective ground.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
The bolt then partially travels down the line to your home.
One
I post the exact comment here.
In schematic diagrams this is the symbol for a fuse:
The other is “what does a “fuse” do?”
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
So, the voltage could go up to 500 volts, and the fuse will not open up.
These are simplified answers to the original question, and does not change anything I wrote above.
At one ohm, the resistor has a maximum of 1 watt power.
Now when you have a certain ac resistance, then a current flows in a loop.
This is where the MOV conducts again, and dissipated the energy.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
But… the neutral is now “floating” because of the 1 ohm resistance.
A fuse is a non-resetable over current circuit protector.
Because the load is inductive, the current lags the voltage.(by a bit).
One is “what exactly is in a ‘surge protector’ ? ”
It also is a device that limits the change in current flow.
so, what happens?
The MOV will conduct when the voltage exceeds 50% of line voltage.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
There are two important concepts here.
but I think this circuit , shows a few more pieces.
Upvotes:
It seems Mohan does not understand the difference between a comment and an Answer.